State of the Art Resurfacing
Frequently Asked Questions
* Do you offer a warranty?
All work performed by Devine Finishes comes with a written 5 year warranty.
* How long does the application process take?
The entire process takes less than a day to complete.
* When can I start using the counter or tub?
You can begin using the counter or tub the next day.
* Does my sink have to be removed?
No, we can do all the resurfacing without removing the sink. Thus, saving you the cost of hiring a plumber and any costs for repairs that may occur when old plumbing is unhooked.
* Is there a strong odor with the application process?
Yes, however we can inject a fragrance (usually vanilla) into the spray material to mask the odor.
* How tough is the new surface?
The material used for the top coat is very durable. It is scratch, chip and extremely heat resistant, in fact it is the same material used on the Alaskan pipeline.
* Are the seams on the counter still there after the application?
No, the seams are not visible as we correct this problem during the repair stage of application to create a virtually seamless countertop.
* What is involved in the granite finish application process?
All work performed by Devine Finishes comes with a written 5 year warranty.
* How long does the application process take?
The entire process takes less than a day to complete.
* When can I start using the counter or tub?
You can begin using the counter or tub the next day.
* Does my sink have to be removed?
No, we can do all the resurfacing without removing the sink. Thus, saving you the cost of hiring a plumber and any costs for repairs that may occur when old plumbing is unhooked.
* Is there a strong odor with the application process?
Yes, however we can inject a fragrance (usually vanilla) into the spray material to mask the odor.
* How tough is the new surface?
The material used for the top coat is very durable. It is scratch, chip and extremely heat resistant, in fact it is the same material used on the Alaskan pipeline.
* Are the seams on the counter still there after the application?
No, the seams are not visible as we correct this problem during the repair stage of application to create a virtually seamless countertop.
* What is involved in the granite finish application process?
• Remove caulking around counter and perform any repairs to the surface - including all seams.
• Mask area around the counter, including cabinets, sink and floor.
• Apply 2-component epoxy primer which allows for a stronger adhesion to the existing surface.
• Then apply the stone finish of your choice which provides the unique granite appearance.
• Once dry, lightly sand to remove any rough textured edges.
• Next, apply 4 to 6 coats of the protective acrylic polyurethane in a high gloss or satin finish.
• Finally, all masking and drop cloths are removed from the area.
• Mask area around the counter, including cabinets, sink and floor.
• Apply 2-component epoxy primer which allows for a stronger adhesion to the existing surface.
• Then apply the stone finish of your choice which provides the unique granite appearance.
• Once dry, lightly sand to remove any rough textured edges.
• Next, apply 4 to 6 coats of the protective acrylic polyurethane in a high gloss or satin finish.
• Finally, all masking and drop cloths are removed from the area.
Get a Granite Finish in Less than a Day - Call for a FREE Estimate: (613) 882-8686